Chemical bond characteristics and infrared reflectivity spectrum of a novel microwave dielectric ceramic CaIn2O4 with near-zero τf

Orthorhombic-structured CaIn₂O₄ ceramics with a space group Pca2₁ were synthesized via a solid-state reaction method. A high relative density (95.6 %) and excellent microwave dielectric properties (ε_r ～11.28, Qf = 74,200 GHz, τ_f ～ ?4.6 ppm/°C) were obtained when the ceramics were sintered at 1375 °C for 6 h. The dielectric properties were investigated on the basis of the Phillips–Van Vechten–Levine chemical bond theory. Results indicated that the dielectric properties were mainly determined by the InO bonds in the CaIn₂O₄ ceramics. These bonds contributed more (74.65 %) to the dielectric constant than the CaO bonds (25.35 %). Furthermore, the intrinsic dielectric properties of the CaIn₂O₄ ceramics were investigated via infrared reflectivity spectroscopy. The extrapolated microwave dielectric properties were ε_r ～10.12 and Qf = 112,200 GHz. Results indicated that ion polarization is the main contributor to the dielectric constant in microwave frequency ranges.     

Evolution of core–rim structures and phase transformations in infra-red transmitting Y-α-SiAlON ceramics

Core–rim structures were observed as common features in Y-α-SiAlON ceramics hot-pressed between 1550?1950 °C. We found most dopants were taken into α’-rims, and a transition layer grown first on α-cores from liquid-phase over-saturated with metal solutes. Elongated β’-grain were formed as minor phase with α’- or AlN-cores thus only after the α’ matrix had consumed up all Y solutes, revealing that the α’ → β’ transformation is controlled by the transient liquid-phase and similar defects and dangling bonds could be detected in both SiAlON phases by cathodoluminescence. Quantitative assessment of Y_m/3Si_12?(m+n)Al_m+nO_nN_16?n demonstrates the multiphase evolution, initiated by over-saturation of Y solutes at low temperatures thus retaining α-phase as cores to lower the infra-red transmittance, dictated by homogenization of Al solutes at higher temperature. The elimination of those phase boundaries leads to better dopant and sintering design for achieving transparent and high-performance SiAlON ceramics.     

碳酸盐岩岩溶储层多井评价方法及地质应用

多井评价是建立在单井精细解释对比分析基础上的预测储层及含油气性平面分布规律的技术方法,而常规测井资料无法区分碳酸盐岩岩溶储层,因而利用多井评价结果确定岩溶发育程度在平面上的分布规律就显得十分重要。为此,在岩心标定成像测井的基础上,对四川盆地高石梯—磨溪地区15口井的成像测井岩溶发育特征进行分析,建立了中二叠统茅口组岩溶发育各分带的标准成像图版,利用交会图及直方图分析各分带的常规测井响应特征,在此基础上形成了电成像测井刻度常规测井识别岩溶发育带的新方法。研究结果表明:①高石梯—磨溪地区茅口组岩溶带自上而下可划分为风化壳残积带、垂直渗流岩溶带、水平潜流岩溶带以及受岩溶作用较弱的基岩;②风化壳残积带在成像测井图像显示为"暗—亮—暗"条带状模式,垂直渗流岩溶带为垂直线状与暗色斑状组合模式,水平潜流岩溶带为水平线状—层状与斑状组合模式,基岩整体显示为亮色块状模式偶见线状或斑状特征;③有效储层主要发育在垂直渗流带和水平潜流带的顶部;④该区茅口组岩溶发育主要受裂缝发育控制,而裂缝发育又与断层关系密切。结论认为,该新方法对碳酸盐岩岩溶储层的多井评价具有普遍适用性,为四川盆地中二叠统风险探井的部署提供了技术支撑。     

Hydrothermally grown uniform TiO2 coatings on ZrO2 fibers and their infrared reflective and thermal conductive properties

Improving the infrared reflectivity of ZrO₂ polycrystalline fibers is of great benefit to its thermal applications. In the present research, we cast a highly uniform TiO₂ coating with a thickness ranging from dozens to hundreds of nanometers on ZrO₂ fibers by utilizing hydrothermal growth. The coating bonds tightly to the ZrO₂ fibers via Zr–O–Ti chemical linkages, and the thickness of the coating can be tailored by varying the hydrothermal growth time. The TiO₂ coating, acting as a sheath towards electromagnetic radiation, not only reflected light with wavelengths ranging from the visible region to the infrared region and up to 8 μm but also shielded the Raman signals of the ZrO₂ fibers. The present research provides an efficient way to cast controllable and uniform coatings on flexible fiber materials. The obtained ZrO₂ fibers coated with TiO₂ may have applications such as reinforcement for bulk ceramics, thermal barrier coatings, aerogels, etc., thus performing the dual functions of mechanical strengthening and thermal insulation.     

Impact of rare earth europium (RE-Eu3+) ions substitution on microstructural,optical and magnetic properties of CoFe2−xEuxO4 nanosystems

In this study, pure cobalt ferrite (CoFe₂O₄) nanoparticles and europium doped CoFe₂O₄ (CoFe_2−xEu_xO₄; x = 0.1, 0.2, 0.3) nanoparticles were synthesized by the precipitation and hydrothermal approach. The impact of replacing trivalent iron (Fe³⁺) ions by trivalent rare earth europium (RE-Eu³⁺) ions on the microstructure, optical and magnetic properties of the produced CoFe₂O₄ nanoparticles was studied. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectra exposed the consistency of a single cubic phase with the evidence of Eu₂O₃ phases for x ≥ 0.2. FTIR transmittance spectra showed that, the all investigated samples have three characteristic metal-oxygen bond vibrations corresponding to octahedral B-site (υ₁ and υ₂) and tetrahedral A-site (υ₃) around 415 cm⁻¹, 470 cm⁻¹ and 600 cm⁻¹ respectively. XRD and energy dispersive X-ray spectroscopy studies affirmed the integration of RE-Eu³⁺ ions within CoFe₂O₄ host lattice and decrease of average crystals size from 13.7 nm to 4.7 nm. Transmission electron microscopy (TEM) analysis showed the crucial role played by RE-Eu³⁺ added to CoFe₂O₄ in reducing the particle size below 5 nm in agreement with XRD analysis. High resolution-TEM (HR-TEM) analysis showed that the as-synthesized spinel ferrite, i.e., CoFe_2−xEu_xO₄, nanoparticles are single-crystalline with no visible defects. In addition, the HR-TEM results showed that pure and doped CoFe₂O₄ have well-resolved lattice fringes and their interplanar spacings matches that obtained by XRD analysis. Magnetic properties investigated by the vibrating sample magnetometer technique illustrated transformation of magnetic state from ferromagnetic to superparamagnetic at 300 K resulting in introducing RE-Eu³⁺ in CoFe₂O₄ lattice. At low temperature (~5 K) the magnetic order was ferromagnetic for both pure and doped CoFe₂O₄ samples. Substitution of Fe³⁺ ions in CoFe₂O₄ nanoparticles with RE-Eu³⁺ ions optimizes the sample nanocrystals size, cation distribution and magnetic properties for many applications.     

基于多体动力学仿真的冰箱助吸器优化设计

某款冰箱在关门过程中,门体在多个小角度处出现悬停的现象,影响用户的体验。针对这一问题,基于多体动力学仿真对冰箱助吸器进行了优化设计。将助吸器变形量、刚度、有效力臂接触位置点至铰链轴心连线长度,以及这一连线与接触位置法向夹角作为关键因子,研究关键因子与设计目标之间的关系,进行助吸器的结构设计与性能评估。在此基础上,基于多体动力学仿真,实现助吸器的优化,并形成最终设计方案。基于多体动力学仿真进行优化设计,可以缩短开发周期,提高设计效率,具有较高的实用价值。     

Microwave dielectric ceramics in (Mg1/3Sb2/3)O2-ZrO2-TiO2 system with near zero τf and low loss in a very wide range

A series of (ZrTi)_1-x(Mg_1/3Sb_2/3)_2xO₄ (0.04?≤?x?≤?0.36) ceramics were successfully synthesized through the conventional solid-state processing. Appropriate content of CuO was added as sintering aids to promote the density of ceramics. The XRD analysis revealed that the main crystalline phase of ceramics sintered at optimal temperature belonged to α-PbO₂-type structure. Raman spectroscopy and far infrared reflectivity (FIR) spectra were employed to study the phonon modes of ceramics, which explained the relationship between microwave dielectric properties and structure. It is interesting that the τ_f are near-zero (+6.6 ~ ?4.6?ppm/°C) and meanwhile the Q×f are relatively high (29,000–41,800?GHz) for samples with x in a very wide range of 0.10–0.36. In this range, their dielectric constants (ε_r) can be adjustable from 35.4 to 24.4. The results demonstrated this ceramic system is a potential candidate for microwave dielectric applications requiring an adjustable dielectric constants and near zero τ_f.     

Review of pulsed thermal NDT: Physical principles,theory and data processing

This paper summarizes the basics of pulsed thermal nondestructive testing (TNDT) including theoretical solutions, data processing algorithms and practical implementation. Typical defects are discussed along with 1D analytical and multi-dimensional numerical solutions. Special emphasis is focused on defect characterization by the use of inverse solutions. A list of TNDT terms is provided. Applications of active TNDT, mainly in the aerospace industry, are discussed briefly, and some trends in the further development of this technique are described.     

The visual impact of augmented reality during an assembly task

Many studies have shown the benefits of augmented reality (AR) to improve manufacturing and control processes in industry. However, the presentation of AR content through optical see-through head-mounted displays may induce unnatural viewing conditions, which consequences on the user’s visual system have not been investigated yet. This study aimed at assessing whether using AR instructions to guide a manual task, i.e., conditions where the user is forced to repeatedly look at and accommodate in different planes to extract information from both real and virtual environments, could potentially impact the visual system of operators. A before/after design study was carried out, asking 26 participants to perform Lego assemblies for 30 min with either paper or AR instructions. The effects of using AR compared to paper instructions were evaluated both on binocular vision, with classical optometric measurements, and on visual fatigue, with the Virtual Reality Symptoms Questionnaire. No clinically significant differences in optometric measurements (far/near visual acuity, stereoacuity, phoria, convergence, fusional amplitude, accommodation amplitude, accommodative convergence) have been found between AR and paper instructions, and only negligible fatigue symptoms have been seen specifically for AR. Results from both objective and subjective measurements suggest that there is no impact of AR on the oculomotor system and that, in this specific case of use, AR can be safely used for production operators.